How to Create and Convert Ext2, Ext3, and Ext4 File Systems

The Linux filesystem is a hierarchical file structure that defines how files are stored and accessed on a Linux operating system. It’s a logical structure built into the system that handles file management that includes the systematic storage, access, and modification of files across directories and sub-directories.

The file system manages attributes such as the file name, size, inodes, user and group ownership, creation date, etc. The systematic storage of data allows for easier and faster file access resulting in smooth workflows.

Before we demonstrate how to create and convert filesystems, let’s explore the major file systems in use on Linux systems today.

Ext2 – Second Extended File System

Also known as the second extended file system, the ext2 filesystem was introduced in the early Linux releases back in 1993. It took over from the Extended File System (Ext FS), the first filesystem designed for the Linux kernel. Due to performance issues and other drawbacks, the EXt Filesystem was replaced by Ext2 which was more robust and offered improved performance.

The Ext2 filesystem is portable and lacks the journaling feature which is associated with resource overhead from additional data processing, memory consumption, and disk access. As such, the Ext2 file system is ideal for flash-based storage devices including pen drives, memory sticks, and SD cards.

Ext3 – Third Extended File System

The Ext3 filesystem also known as Third Extended File System, was released in November 2001 for the Linux kernel version 2.4.15. The Ext3 filesystem is a significant improvement to Ext2 and is still used in some Linux distributions.

Just like Ext2, the Ext3 filesystem supports a maximum file size of 2TB and caps the length of the file name to 255 bytes. Unlike its predecessor, the Ext3 filesystem supports journaling, which is the greatest improvement.

Journaling brings on board significant improvements such as:

  • Reduces the likelihood of data loss or corruption through power failure or system crash.
  • Keeps track of changes made and logs them in files.
  • Revives the filesystem after a system crash.

Ext4 – Fourth Extended File System

The ext4 filesystem is yet another journaling filesystem that is the successor to the ext3 filesystem, which was released on December 2008 and currently remains the widely used filesystem, especially in Debian / Ubuntu systems.

It supports files and filesystems of up to 16TB in size and caps the maximum filename length to 255 bytes.

Key highlights of Ext4 include:

  • Allocation Improvements – The Ext4 filesystem improves reads and write performance through efficient allocation of storage blocks before writing them to disk.
  • Timestamp Improvements – The Ext4 filesystem extends the date up to May 10, 2446, by adding an additional 408 years to the timestamp.
  • Faster File System Checks – In the Ext4 filesystem, inodes, and unallocated block groups are pre-marked. As such, the time needed to run e2fsck and fsck commands is greatly reduced leading to faster filesystem checks.
  • Online Defragmentation – One of the drawbacks of Ext2 and Ext3 file systems is disk defragmentation which inevitably impacts disk performance. The ext4 file system provides the e4defrag tool which is a command-line tool used for defragmenting Ext4 filesystems and by so doing, optimizes performance.
  • Journal Checksums – We have already seen the advantages of journaling which include enabling recovery in case of hardware failure which leads to corruption of files. The journal checksum option boosts performance since it shortens the time taken for journaling to happen.

How to Determine File System Type?

To determine your Linux file system type, run the following command in the terminal as a root user.

# df -hT | awk '{print $1,$2,$NF}' | grep "^/dev" /dev/sda1 ext4 /
/dev/sda2 vfat /boot/efi
/dev/sdb3 ext4 /media/tecmint/Personal_Sites
/dev/sdb1 ext4 /media/tecmint/Personal_Data
/dev/sdb2 ext4 /media/tecmint/Linux_Data
Find Linux File System Type
Find Linux File System Type
Warning: Please take important data backup before executing the below commands.

Creating an Ext2, or Ext3, or Ext4 File Systems

Once you create a file system using the fdisk or parted command, use the mke2fs command to create either of the file systems and make sure you replace sdXX with your device name.

Creating an Ext2 File System

To convert the file system to an Ext2 file system, run the following command as root.

# mke2fs /dev/sdX

Creating an Ext3 File System

To create an EXt3 filesystem, run the command:

# mkfs.ext3 /dev/sdX
# mke2fs –j /dev/sdX

In the above command, the -j option is used for journaling.

Creating the Ext4 File System

To create an Ext4 filesystem, format the filesystem block as shown.

# mkfs.ext4 /dev/sdX
OR # mke2fs -t ext4 /dev/sdX

In the above command, the -t option is used to specify the file system type.

Converting an Ext2, or Ext3, or Ext4 File Systems

Conversion from one file system to another is quite an easy task. Suppose you have an Ext2 partition block labeled /dev/sdb1 mounted on /data mount point.

You can find it in the /etc/fstab file entries labeled as shown.

/dev/sdb1 /data ext2 defaults 0 0

To proceed, unmount the partition first.

# umount /dev/sdb1 

Convert Ext2 to Ext3

To convert it to Ext3, use the tune2fs command and pass the -j option to enable journaling.

# tune2fs /dev/sdb1 

Next, edit the /etc/fstab file and change the file system type to ext3. So the entry should look like this.

/dev/sdb1 /data extd3 defaults 0 0

Then mount the partition using the mount command.

# mount /dev/sdb1 /data

Finally, reboot the system

# reboot

Convert Ext2 to Ext4

As before, unmount the block volume.

# umount /dev/sdb1 

Next, use the tune2fs command together with the “-O extents,uninit_bg,dir_index” option to enable the journaling.

# tune2fs -O extents,uninit_bg,dir_index /dev/sdb1

As before, mount the filesystem and reboot the system.

# mount /dev/sdb1 /data

Finally, reboot the system.

# reboot

Convert Ext3 to Ext4

The procedure of converting from Ext3 to Ext4 is similar to that of converting Ext2 to Ext4.

So, first, unmount the block volume.

# umount /dev/sdb1 

Next, use the tune2fs command together with the “-O extents,uninit_bg,dir_index” option to enable the journaling.

# tune2fs -O extents,uninit_bg,dir_index /dev/sdb1

Now run the fsck command to fix up some on-disk structures that have been modified.

# fsck -pf /dev/sdb1
# e2fsck -f /dev/sdb1

Finally, mount the filesystem and reboot the system.

# mount /dev/sdb1 /data
# reboot

We hope that this guide provided you with insights into the major filesystem types on Linux and how you can convert from one filesystem type to another. Your feedback on this guide is much welcome.

Similar Posts