This month Graham reviews Bela,…

This month Graham reviews Bela, Quickemu, GPU-Viewer, Maestral, Termux and AnLinux, Space Cadet, and more!

Realtime audio platform


Bela is a programmable audio platform with incredible performance, an integrated development environment, a large active community, and virtually no limits. But it’s also a slightly unusual project because you need some extra hardware to make it properly work. That hardware is a BeagleBone Black with an optional shield that adds multiple digital, analog, and audio inputs and outputs. This setup, when combined with the Linux-based software stack, promises a 0.5ms (half) delay between when a sound is triggered by the software to when the audio exits the hardware. For comparison, a Mac can manage a few milliseconds with the very best expensive hardware, desktop Linux with a realtime kernel adds a few more milliseconds to this, an Arduino is in the 10ms range, and a Raspberry Pi the 20ms range. All these delay times are much quicker than what you’d get from a default PulseAudio configuration without specialist hardware, which may typically operate with a delay of 100ms.

An ultra-low audio delay makes a big difference because it enables Bela to do all kinds of things transparently, before delays and their associated latency would start to break the immersion. A good example might be if you were to use Bela to create a software-generated drum kit with a DIY hardware trigger. The ultra-low response time would allow you to hit the trigger and hear the sound almost instantaneously, just as you would with real drums. It’s this lack of delay that most differentiates digital instruments from their analog counterparts, and the low delay values seen on the Bela platform with the BeagleBone Black and the audio shield really are game changing.

None of this would be worth mentioning if there weren’t an accessible and easy-to-use software stack that’s both ready to take advantage of this power and easy to use when you want to build your own hardware or software experiments. High performance comes from Xenomai real-time Linux extensions, and the flexibility comes from an integrated web-hosted development environment that becomes accessible as soon as you connect the device to your Linux computer. You can use this Integrated Development Environment (IDE) to code in SuperCollider, Csound, or C++, and even to upload Pure Data patches with graphical previews of C++. All of this software can of course be run on your Linux desktop, where patches can be developed and tested before being transferred to the onboard IDE. But developing with the IDE is also perfectly feasible, and you’ll get an immediate response from the hardware when you do press play. It may sound complicated, but there’s enough here for even beginners to get started.


Use Express-Checkout link below to read the full article (PDF).

Posted by Contributor